What to Do After a Flood or Burst Pipe in Your Swindon Home

A burst pipe or flood can cause thousands of pounds of damage in a matter of hours but the actions you take in the first 30 minutes can make a significant difference to how much damage your home actually suffers.

This guide walks you through exactly what to do, step by step, from the moment you discover water in your property. Whether it is a burst pipe under the kitchen sink, a leaking radiator valve, a failed washing machine hose, or flood water entering your home, the priority sequence is the same: stop the water, protect yourself, and limit the damage.

If you are dealing with water damage right now, call us on 01793 238738 for emergency help. We provide 24/7 water damage restoration across Swindon and Wiltshire.

Step 1: Stop the Water

Your first priority is to stop more water entering your property.

If it is a burst pipe or plumbing failure, turn off the mains water supply. In most Swindon homes, the stopcock is under the kitchen sink or where the mains pipe enters the property. Turn it clockwise to close it. If you live in a flat, your stopcock may be in a communal cupboard — check with your management company or landlord.

If the leak is from a heating system (radiator valve, boiler, or underfloor heating), also switch off the central heating. The expansion vessel and circulating pump will continue pushing water through the system if the boiler stays on.

If flood water is entering from outside a swollen drain, surface water, or river flooding you cannot stop it at source. Focus instead on moving to safety and protecting what you can.

Step 2: Switch Off the Electricity

Water and electricity are a lethal combination. If water has reached any electrical sockets, appliances, or the consumer unit (fuse box), do not touch anything electrical. If it is safe to do so, switch off the electricity at the consumer unit. If the consumer unit is in or near the flooded area and you cannot reach it safely, call your electricity provider’s emergency line or 105 (the national power emergency number).

If you have electric underfloor heating in the affected area, make sure this is switched off at the consumer unit even if the flooding appears minor.

Step 3: Protect Your Belongings

Once it is safe to do so, move furniture, rugs, documents, electronics, and valuables away from the water. Lift items off the floor onto tables, worktops, or upstairs rooms.

Focus on irreplaceable items first: photographs, documents, laptops, jewellery. Furniture and carpets can often be restored or replaced through insurance personal items cannot.

If water is still present, do not attempt to pull up carpets yourself. Waterlogged carpet is extremely heavy and pulling it up incorrectly can damage the underlay and subfloor further. A professional restoration team will handle this safely.

Step 4: Document the Damage for Insurance

Before you start cleaning up, photograph and video everything. Your insurance company will need evidence of the damage, the water level, and the affected areas. Take photos from multiple angles and include:

— The source of the water (burst pipe, entry point, failed appliance)

— Water levels on walls and furniture (a ruler or tape measure in frame helps)

— Damage to flooring, skirting boards, plaster, and contents

— Any items you had to move or discard

Keep a written log of the timeline: when you discovered the water, when you turned off the supply, who you called, and any emergency actions you took. This documentation supports your insurance claim and makes the process significantly smoother.

Step 5: Start Removing Standing Water

If the source has been stopped and it is safe, begin removing standing water. Use buckets, mops, and wet-dry vacuum cleaners if you have them. The sooner water is removed, the less it soaks into walls, floors, and timber.

Do not use a standard household vacuum cleaner it is not designed for water and you risk electrocution.

For significant flooding (water across multiple rooms, or more than a few centimetres deep), you need professional water extraction equipment. Domestic tools simply cannot remove water fast enough to prevent further absorption into the structure.

Step 6: Ventilate But Do Not Heat

Open windows and internal doors to allow air circulation. This helps surface water evaporate. However, do not turn on the heating to try to speed up drying.

Forcing heat into a wet structure causes problems. Rapid heating drives moisture deeper into plaster, timber, and masonry rather than drawing it out. It can cause plaster to crack, timber to warp, and create ideal conditions for mould growth within 24–48 hours.

Professional structural drying uses controlled dehumidification not heat to extract moisture safely. Industrial LGR (Low Grain Refrigerant) dehumidifiers and air movers dry a property up to five times faster than domestic equipment while keeping the structure stable.

→ How professional property drying works

Step 7: Call Your Insurance Company

Contact your home insurance company as soon as possible most policies require you to report damage promptly. Have your policy number and the photographs you took in Step 4 ready.

Key questions to ask your insurer:

— Does my policy cover this type of water damage? (Most buildings insurance covers ‘escape of water’ — burst pipes, leaking appliances but may not cover gradual leaks or maintenance issues.)

— Do I need to use your approved restoration contractor, or can I choose my own?

— What is my excess?

— Will you appoint a loss adjuster?

Important: Do not start any permanent repairs or redecoration until your insurer has assessed the damage and agreed the scope of work. Emergency mitigation (stopping the water, removing standing water, starting drying) is expected and should be done immediately but reinstatement work should wait for insurer approval.

→ Does home insurance cover water damage? full guide

Step 8: Call a Professional Restoration Company

This is where most homeowners underestimate the situation. A burst pipe that floods your kitchen for 20 minutes can leave moisture in walls, under floors, and in the substructure for weeks. What looks dry on the surface is often saturated underneath.

A professional water damage restoration company will:

Find and fix the source. If the leak has not been repaired, it needs to be before drying starts. At DampShop Services, we use thermal imaging cameras and acoustic listening equipment to locate leaks non-invasively, then repair them ourselves. You do not need to call a separate plumber and then a separate drying company.

→ Our leak detection and repair services

Extract remaining water. Industrial pumps and extraction units remove water from subfloors, cavities, and saturated materials that domestic tools cannot reach.

Set up controlled drying. LGR dehumidifiers and air movers placed strategically throughout the affected area, with daily moisture monitoring using professional meters to track progress.

Provide a drying certificate. This confirms the property has reached safe moisture levels and is ready for redecoration. Most insurers require this before they authorise reinstatement works.

Handle sanitisation. Depending on the water source (clean water from a burst pipe vs contaminated water from a drain or sewage), anti-microbial treatment may be needed to make the affected area safe.

→ Full water damage restoration services

Common Mistakes After a Flood or Burst Pipe

Turning the heating on full blast. As explained above, this drives moisture deeper into the structure and causes secondary damage. Use controlled dehumidification, not heat.

Assuming it will dry on its own. A wall that has absorbed water will not dry naturally for months and in that time, mould can establish, timber can decay, and plaster can fail. Professional drying takes days to weeks, not months.

Redecorating before the property is dry. Painting or papering over damp walls traps moisture and guarantees problems later. Always get a drying certificate before redecoration.

Not checking adjacent rooms and floors below. Water follows gravity. A burst pipe on the first floor can saturate the ground-floor ceiling, walls, and even the subfloor. Always check rooms below the source.

Waiting too long to act. Mould can start growing on damp surfaces within 24–48 hours. Timber decay organisms activate once wood moisture content exceeds 20%. The faster you act, the less secondary damage you face.

When Should You Call a Professional?

For any of the following situations, call a professional water damage restoration company rather than trying to manage it yourself:

— Water has been present for more than a few hours

— Water has reached walls, skirting boards, or under the floor

— Multiple rooms are affected

— You can see or smell mould forming

— The source of the water is contaminated (drains, sewage, external flooding)

— You need a drying certificate for insurance

— The leak source has not been found

At DampShop Services, we provide the complete service: leak detection, repair, water extraction, structural drying, sanitisation, and reinstatement. One company, one call not three separate contractors.

Need Emergency Help Now?

If you are dealing with a burst pipe, flood, or water damage in Swindon or anywhere in Wiltshire, call us now for 24/7 emergency assistance.

Call: 01793 238738

Email: sales@dampshop-services.co.uk

Leave a Reply

Your email address will not be published. Required fields are marked *