If your water bill has suddenly jumped and your usage has not changed, you probably have a hidden leak. Even a small leak on a supply pipe can waste thousands of litres per month and add hundreds of pounds to your annual bill.
The problem is that most water leaks are invisible. They happen underground, under floors, inside walls, or within central heating systems where you cannot see or hear them. By the time visible signs appear, the damage is often well advanced.
In this guide, we show you how to check whether you have a hidden leak, where leaks most commonly hide, how professional leak detection finds them without digging up your property, and what to do once a leak is confirmed.
How to Check If You Have a Hidden Water Leak
Before calling a professional, you can run a simple water meter test yourself. This takes about 30 minutes and will tell you whether water is leaving your system when nothing should be running.
Step 1: Turn Off Everything
Make sure every tap, shower, washing machine, dishwasher, and outside tap is turned off. Do not flush any toilets. If you have a water softener or an automatic irrigation system, turn those off too.
Step 2: Read Your Water Meter
Find your water meter (usually under a small metal or plastic cover near your property boundary). Write down the exact reading, including the small red numbers or the rotating dial.
Step 3: Wait 30 Minutes
Do not use any water during this time. Make sure nobody else in the house turns on a tap.
Step 4: Read the Meter Again
Check the meter after 30 minutes. If the reading has changed or the dial has moved, water is flowing through your supply pipe even though nothing is switched on. You have a leak.
Step 5: Check Whether the Leak Is Inside or Outside
Turn off your internal stop tap (usually under the kitchen sink). Wait another 15 minutes and check the meter again. If the meter has stopped moving, the leak is somewhere inside your property. If it is still moving, the leak is between the meter and your internal stop tap, which usually means an underground supply pipe leak.
Signs of a Hidden Water Leak
Not every leak shows up as a puddle. These are the most common signs that water is escaping somewhere in your property:
Unexplained increase in water bills. This is often the first sign. If your bill has risen significantly without any change in usage, a leak is the most likely cause.
Damp patches on walls, ceilings, or floors. Persistent damp that does not dry out, especially in areas away from bathrooms and kitchens, often points to a leaking pipe within the structure.
Sound of running water when nothing is on. If you can hear a faint hissing or running sound through the walls or floor, water is moving somewhere it should not be.
Low water pressure. A sudden or gradual drop in water pressure can mean water is escaping before it reaches your taps.
Warm spots on the floor. A hot spot on a tiled or concrete floor can indicate a leak on an underfloor heating pipe or a hot water pipe running beneath the slab.
Mould growth in unusual places. Mould appearing behind furniture, in corners, or on walls that are not near a bathroom often indicates a hidden moisture source. If you have mould, our mould removal service can deal with it once the leak is fixed.
Cracking or lifting floor tiles. Water leaking under a tiled floor can undermine the adhesive and cause tiles to lift or crack without any obvious reason.
Where Hidden Water Leaks Are Most Commonly Found
Underground Supply Pipes
The pipe that runs from your water meter to your property is buried underground and can develop leaks from corrosion, ground movement, tree root damage, or age. These leaks can run for months without any visible sign above ground because the water drains away into the soil.
Central Heating Pipework
Leaks on central heating pipes, particularly in older systems, often develop at joints and fittings hidden under floors or behind walls. A gradual loss of pressure on your boiler gauge is a common symptom. The water escaping is usually very small in volume but causes significant damage over time to timber joists and plaster.
Underfloor Heating Systems
Underfloor heating pipes are buried in or under the floor screed. A leak here is particularly difficult to find without specialist equipment because the pipes are not accessible. Warm or wet spots on the floor surface are the usual indicator.
Pipes Inside Walls and Ceilings
Pipes running through wall cavities, beneath plasterboard, or above ceilings can develop pinhole leaks from corrosion, especially in copper pipework. These leaks are invisible until enough water accumulates to show as a stain, bulge, or damp patch.
Flat Roofs and Balconies
Flat roof membranes degrade over time, and water can enter through tiny failures at joints, upstands, or around penetrations. The leak often appears inside the building a long way from the actual point of entry because water travels along the roof structure before finding a way through.
How Professional Leak Detection Works
Our leak detection service uses specialist equipment to find the exact location of a hidden leak without unnecessary disruption. The goal is to pinpoint the leak so that only a small, targeted repair is needed, rather than ripping up floors or digging trenches to find it.
Thermal Imaging
FLIR thermal imaging cameras detect temperature differences on surfaces. A leaking hot water pipe shows as a warm area on a floor or wall. A cold water leak shows as a cooler zone. Thermal imaging is completely non-invasive and gives us a visual map of where moisture and temperature anomalies are, even through finishes.
Acoustic Leak Detection
Pressurised water escaping through a crack or hole creates a sound that travels through the pipe and the surrounding material. Acoustic listening equipment amplifies this sound and allows us to locate the exact point of the leak, even on pipes buried underground or under concrete.
Tracer Gas
For leaks that cannot be found by thermal or acoustic methods, we can introduce a safe, non-toxic tracer gas into the pipework. The gas escapes through the leak point and rises to the surface, where a sensitive gas detector pinpoints the location precisely. This is particularly effective for underfloor heating leaks and buried pipe leaks.
Moisture Mapping
Using Protimeter moisture meters and borescope cameras, we map the extent of moisture within the building fabric. This tells us not only where the leak is, but how far the water has spread through walls, floors, and timbers, which is essential for planning the drying and repair.
Why Use a Specialist, Not Just a Plumber?
A plumber can fix a leaking pipe once it has been found and exposed. But finding a hidden leak requires specialist detection equipment that most plumbers do not have. Without it, the only option is to start opening up floors, walls, and ground until the leak is found, which causes far more disruption and cost.
A specialist leak detection company like DampShop Services finds the leak first, marks the exact location, and only then carries out the minimum opening-up needed to access and repair it. We also provide property drying and water damage restoration to deal with the damage the leak has caused, so you deal with one company from detection through to full reinstatement.
Will Insurance Cover Leak Detection and Repair?
Most buildings insurance policies cover ‘trace and access’ for hidden leaks. This means the insurer will pay for the cost of finding the leak (detection) and accessing it (opening up floors, walls, etc.), as well as the cost of repairing the damage the leak has caused.
The repair of the pipe itself is not always covered, but the consequential damage (damp walls, damaged floors, mould, redecorating) usually is. We work directly with insurance companies on leak detection and restoration claims and can manage the process for you.
What to Do If You Think You Have a Hidden Leak
- Run the water meter test described above. If the meter moves when everything is off, you have a confirmed leak.
- Check your boiler pressure gauge. If it keeps dropping and you have to top it up regularly, you likely have a central heating leak.
- Contact your water company. If the leak is on the supply pipe between the meter and the boundary of your property, your water company may be responsible. If it is on your side of the boundary, it is your responsibility.
- Call a specialist leak detection company. Contact us on 01793 238738 or use our online contact form. We will carry out a non-invasive survey using thermal imaging, acoustic detection, and moisture mapping to find the leak without causing unnecessary damage.
- Do not ignore it. A hidden leak does not fix itself. The longer it runs, the more water you waste, the higher your bill, and the greater the risk of structural damage, timber decay, and mould.
Frequently Asked Questions
How much water can a hidden leak waste?
Even a small leak losing one drip per second wastes approximately 10,000 litres per year. A larger leak on a supply pipe can waste far more. Thames Water and other suppliers estimate that a running supply pipe leak can add hundreds of pounds to an annual water bill.
Can you detect a leak without digging?
Yes. Our leak detection equipment, including thermal imaging, acoustic sensors, and tracer gas, locates leaks without digging, removing flooring, or opening walls. We only need access to the leak point itself for the repair, not the entire pipe run.
How long does leak detection take?
A typical leak detection survey takes 1 to 3 hours, depending on the size of the property and the complexity of the pipework. In most cases, we can locate the leak and provide a report on the same visit.
Will my water company reduce my bill if I had a leak?
Most water companies offer a leakage allowance. If you can show that a leak was repaired, they will typically adjust your bill to reflect your normal usage rather than the inflated amount caused by the leak. We provide a report confirming the leak and repair that you can submit with your application.
What happens after the leak is found?
Once we locate the leak, we carry out the repair with the minimum disruption needed. If the leak has caused water damage to the surrounding structure, we provide professional drying and full water damage restoration to return your property to its pre-damage condition. We also handle the insurance claim if applicable.
Need Leak Detection in Swindon?
If your water bill has increased unexpectedly, you can hear running water when nothing is on, or you have noticed damp patches, warm spots, or mould that should not be there, contact us today.
Our leak detection service uses thermal imaging, acoustic detection, tracer gas, and moisture mapping to find hidden leaks quickly and without unnecessary disruption. We detect, fix, dry, and restore, all under one roof.
Call 01793 238738 for leak detection and water damage restoration.
Email: sales@dampshop-services.co.uk
Or use our online contact form to request a callback.